PSOC1和PowerPSoC有什么不同？

事实上，PSOC1的电源PSOCS家族成员是MC8核心。此外，它们包含一些用于直接控制介质电流或驱动MOSFET的更高电流要求的读出放大器和DRIVE输出。请在这里打开一个应用说明：HTTP://www. CyPress？COM/？ID＝2308和rTID＝76
让阳光照进来…
鲍勃



     以下为原文
  Indeed are the Power-PSoCs family members of PSoC1 with an MC8-Core. Additionally they contain some sense-amplifiers and dirve outputs for directly controlling medium currents or driving MOSFETs for higher current requirement. I Suggest you to open one of the application notes here:http://www.cypress.com/?id=2308&rtID=76
     
    Let the sunshine in...
    Bob

当你查看一个电力PSoC的数据表时，你会看到这里有一个完整的块专用于电力PopopHeles。所以，你可能需要添加一些驱动程序和粘贴逻辑到PSoC1芯片来获得你想要的…
当然，只要没有特殊的硬件，你就可以在任何其他PSoC中使用C语言编写的任何算法。你在哪里发现提到MPPT在附注？
鲍勃



     以下为原文
   When you have a look at the datasheet for a power-PSoC you'll see that there is a complete block that is dedicated to the power-peropherals here.      So it might be that you'll have to add some driverts and glue logic to a PSoC1 chip to get what you desire...
     Of course you can use any algorithm written in C on any other PSoC as long as there is no special hardware involved. Where did you find the mentioning of MPPT in the appnotes?
      
     Bob

PoPPSoC可以被看作是“PSoC1+电源外设”。功率外设主要是FET、栅极驱动器、滞环控制器、电流灵敏放大器、专用比较器和DACS。另一部分[PSoC1]具有典型PSOC1的数字和模拟特性。



     以下为原文
  PowerPSoC can be seen as 'PSoC1 + Power peripherals'. The Power peripherals are mainly FETs, Gate drivers, Hysteretic controller, Current Sense Amplifier, dedicated Comparators and DACs.The other part[PSoC1] has the digital and analog capabalities of a typical PSoC1.

MPPT？RID＝39126
问候，Dana。



     以下为原文
  MPPT - http://www.cypress.com/?rID=39126
     
    Regards, Dana.